Test Pro - WINPROMY CONSULTANCY - IT Support Malaysia | Affordable Test Pro by Winpr0

testpro

Test Pro

Test Pro CV 100 (Multifunction Cable Tester) - Specifications

Test Pro

Power Over Ethernet (PoE) Validation

TestPro excels at validating PoE with the most comprehensive test functionality available and in compliance with TIA 1152A and IEEE 802.3 af/at/bt standards.

What sets TestPro bapart is the ability to validate the Power Source Equipment (PSE), a.k.a. the switch with actual power load, the only true way to validate if the level of power needed at the jack where a Powered Devices (PD) will deploy,

such as a Camera, AP, Window Covering, etc. is to measure actual power at the jack with a report of available Voltage, Current, and Real Power expressed in Wattage.

Multi-Gigabit Link Speed Qualification

TestPro qualifies cabling links for 1/2.5/5/10 Gigabit Ethernet in accordance with 802.3ab, IEEE 802.3bz, and IEEE 802.3an respectively. TestPro reports these values based on end-to-end Signal to Noise Ratio (SNR) operating margin, to provide an objective assessment of link performance under network load condition.

TestDataPro Results Management Software

TestDataPro is a PC based results management software that comes standard with all models of TestPro. TestDataPro works in tandem with TestPro, which allows you to define projects and categorize test results into logical groupings once uploaded into the database.

The database provides you with the ability to collaborate by viewing in-depth test details on-line as well as provide .pdf based printed reports. TestDataPro allows you to export results in .csv or .pdf format.

Price to be Quoted. Please contact us.

You may also visit our online shop www.shop.winpro.com.my

testpro

Advantages of TestPro

Copper Cable Certification Testing – TestPro CV100 has a sophisticated RF measurement engine, able to support up to 3GHz frequency range. TestPro supports all mode combination parameters (including TCL), and exceeds the level 2G accuracy specifications for copper certification testing.

Single Pair Ethernet (SPE) – TestPro supports testing of SPE cable with hot swappable test adapters

Fiber Optic Certification Testing – TestPro’s fiber optic measurements provide Tier-1 certification per industry standards as well as customizable limits for both Multimode and Singlemode Fiber Optic premise cabling. Additionally, these adapters include an integrated VFL to provide a quick indication of a break in the wire, as well as an integrated connection port for measuring electrical voltage for hybrid powered fiber applications in support of smart building initiatives.

Fiber Optic End Face Inspection – Dirty connectors are most common cause for fiber optic link underperformance. The fiber inspection feature of TestPro allows you to check the cleanliness of fiber end faces in both installation and troubleshooting environments.

Scalable and flexible – The TestPro 100 comes with optional detachable adapters that enable a wide variety of test functions to cater to the needs of today’s network infrastructures, as well as to easily scale to cater for future requirements.

Autotest feature – Autotest is the easiest way to ensure that cabling links will support the desired network rate. It is also fast at 6 seconds including all optional test parameters such as TCL, ELTCL, DC Resistance Unbalance, and more.

PoE testing – The AD-NET-CABLE adapter provides comprehensive testing for verifying PoE deployments. It supports all PoE standards including 802.3 af/at/bt and UPOE for reporting of PSE configuration and snf full load testing with reporting of Current/Wattage/Voltage. In addition, it also allows for sustained loading of the PoE source over longer periods to identify hard to find intermittent power drops, through external loads.

Multi-gig Link Speed Qualification – TestPro is capable of validating a link to ensure Ethernet can be supported at 1/2/5/5/10GBASE-T. It can perform SNR measurements while under traffic and PoE load, ensuring confidence that a cabling link will support the desired network rate.

Network Connectivity Testing – TestPro can connect to a live Ethernet network through the 10/100/1000 network interface connector, or via WiFi (Edimax EW-7822ULC Wi-Fi USB adapter required). Once connected, TestPro will auto-discover connected devices on the network. You can Ping any other device to verify connectivity with traceroute and measure latency.

Wi-Fi Testing – TestPro can auto-discover all 2.4GHz and 5GHz Wi-Fi SSIDs and their associated RSSI values (received power level). This is helpful in discovering Wi-Fi “dead zones” and checking Wi-Fi connectivity with optional Edimax EW-7822ULC Wi-Fi USB Adapter.

Industry’s Best Warranty – All TestPro CV100’s come with a full 2-year warranty from date of purchase – double what competitors offer and proof of our confidence in the quality and reliability of our instruments.

© Copyright 2024 - WINPROMY CONSULTANCY SDN BHD. (1065242-V) All Rights Reserved.